Skip header
Help
 

Preparing for Printing > Entering Characters

Entering Characters

This section describes how to enter characters using the control panel when configuring the machine's settings.

Use the keys as follows to enter characters.

To enter a digit

Press a number key.

To delete a character

Press the [Clear/Stop] key.

To enter a fax number

  • To enter a number

    Use the number keys.

  • To enter characters other than digits

    "Asterisk": Press the [Asterisk] key.

    "Sharp": Press the [Sharp] key.

    Pause: Press the [Pause/Redial] key. "-" appears on the screen.

    Tone: Press [Tone]. "T" appears on the screen.

To enter a name

Letters, numbers, and symbols can be entered using the number keys.

To enter two characters that use the same number key successively, wait briefly after entering the first character.

For details about the characters you can enter, see Available Characters.

Note

  • Characters you can enter depend on the setting you are configuring.

  • If the number you entered is too large or too small for the setting, it will not be accepted.