Skip header
Help
 

Preparing for Printing > Connecting the Computer and Installing the Software (Network Connection) > Connecting the Machine via a Wireless LAN Interface > Switching a wireless LAN

Switching a wireless LAN

To use a wireless LAN, you must switch [LAN Type] to [IEEE 802.11b/g/n].

1Press the [User Tools] key.

2Press [Login].

3Enter the login password, and then press the [OK] key.

If this is the first time to do this, enter "000000" as the password.

4Press the [Up arrow key] or [Down arrow key] key to display [System Settings], and then press the [OK] key.

5Press the [Up arrow key] or [Down arrow key] key to display [Interface Settings], and then press the [OK] key.

6Press the [Up arrow key] or [Down arrow key] key to display [Network], and then press the [OK] key.

7Press the [Up arrow key] or [Down arrow key] key to display [LAN Type], and then press the [OK] key.

8Press the [Up arrow key] or [Down arrow key] key to display [IEEE 802.11b/g/n], and then press the [OK] key.

Operation panel screen illustration

9After changing this setting, turn the machine off, and then turn it on again.