Network Settings for Ethernet and Wireless LAN
Make the following network settings according to the network interface you are using.
The following table shows the settings that can be specified and their default factory values.
Setting Name |
Value |
|---|---|
Effct. Protocol |
IPv4: Active IPv6: Inactive |
Ethernet Speed |
Auto Select |
Machine IPv4 Address |
Auto-Obtain (DHCP) |
IPv4 Gateway Address |
0.0.0.0 |
Machine IPv6 Address |
- |
IPv6 Gateway Address |
- |
IPv6 Stateless Setting |
Active |
Domain Name |
Auto-Obtain (DHCP) |
DNS Configuration |
Auto-Obtain (DHCP) |
DDNS Configuration |
Active |
Permit SNMPv3 Communictn. |
Encryption/Cleartext |
Permit SSL/TLS Comm. |
Ciphertext/Cleartext |
Auto Email Notify |
Inactive |
The following example explains how to allocate an IPv4 address.
Press the [User Tools] key.
Press [Login].
Enter the login password, and then press the [OK] key.
Press the [
] or [
] key to display [System Settings], and then press the [OK] key.
Press the [] or [] key to display [Interface Settings], and then press the [OK] key.
Press the [] or [] key to display [Network], and then press the [OK] key.
Press the [] or [] key to display [Machine IPv4 Address], and then press the [OK] key.
Press the [] or [] key to display [Specify], and then press [IP Add.].
The current IP address appears on the display.
Press the number keys to specify values in each field, and then press the [OK] key.
To get an IP address for the machine, contact your network administrator.
Specify "Subnet Mask" in the same way.
After you have made all the settings, press the [OK] key.
The specified settings are set and the initial screen reappears.
You can print the interface settings list to confirm the specified settings. For details, see Print I/F Settings List
.
Press the [Escape] key.
Turn the machine off.
