Guide to Functions of the Machine's External Options

Finisher SR4060

Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

Interposer

Inserts cover or slip sheets into copied or printed paper.

Multi-Folding unit

The Multi-Folding unit can apply the following folds: Half Fold, Letter Fold-out, Letter Fold-in, Double Parallel Fold, Gate Fold, and Z-fold.

To use the Multi-Folding Unit, the Finisher SR4070 or the Finisher SR4080 is required.

Extension unit

Attached to the LCT and holds 2,500 sheets of B4 JIS, A4, 8¹/₂ × 14, or 8¹/₂ × 11 paper.

Large capacity tray (LCT)

Holds up to 4,000 sheets of paper.

Copy connector

Allows you to use the connect copy function.

A3/11 × 17 tray unit

You can load paper sizes up to A3 or 11 × 17 in Tray 1 using this unit. If you install the A3/11 × 17 tray unit on your machine, you cannot use it as a tandem tray.

Copy tray

If you select this as the output tray, copied/printed paper and fax messages are delivered here face down.

Finisher SR4080

Sorts, stacks, and staples multiple sheets of paper. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

Booklet Finisher SR4070

Sorts, stacks, staples, and punches multiple sheets of paper. The saddle stitch function can staple multiple sheets of paper in the center and fold them into booklets. Consists of the following paper trays:

• Finisher upper tray

• Finisher shift tray

• Finisher booklet tray

Output jogger

Jogs the sheets delivered to the finisher shift tray.

Mailbox

Sorts printed paper. Consists of Mailbox output trays 1 - 9.