Guide to Components

Front and left view

1. ADF

   Lower the ADF over originals placed on the exposure glass.

   If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.

2. Exposure glass

   Place originals face down here.

3. Copy tray

   Copied/printed paper and fax messages are delivered here.

4. Main power switch

   To operate the machine, the main power switch must be on. If it is off, open the cover and turn the switch on.

5. Control panel

   See Guide to the Names and Functions of the Machine's Control Panel.

6. Front cover

   Open to access the inside of the machine.

7. Paper trays (trays 1–3)

   Load paper here.

   Tray 1 is a tandem tray where paper on the left side automatically moves to the right when paper there has run out.

Front and right view

1. Ventilation holes

   Prevent overheating.

2. Paper guides

   When loading paper in the bypass tray, align the paper guides flush against the paper.

3. Bypass tray

   Use to copy or print on OHP transparencies and label paper (adhesive labels).

4. Extender

   Pull this extender out when loading A4, 8¹/₂×11 or larger size paper in the bypass tray.

Rear and left view

1. Ventilation holes

   Prevent overheating.