Previous
Printing on tab stock becomes possible if you install the optional tab stock fence. However, only tab stock with the tab on the right (top part of the paper) can be printed on.
To install an optional tab sheet fence, contact your sales or service representative.
Be sure to check the position of the tab beforehand, so that images to be printed do not come out slanted. If there are any letters in a position where the tab is not present, toner may dirty the back of the paper.
If the position of the tab conflicts with the position of staples or punch holes, the tab position will be prioritized.
For details about tab stocks size that can be printed, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
If you select [Shift Print Position for [Tab Stock]] in the printer driver, you must also select [Machine Setting(s)] in [Tray Setting Priority] for the corresponding tray under [System] in [Printer Features] on the control panel. For details about [Tray Setting Priority], see Prioritizing the Paper Settings
.When you enable this function, the [Extended Auto Tray Switching] function will be disabled. For details about [Extended Auto Tray Switching], see System
.
