Skip header
 

Loading Paper into the A3/11 × 17 Tray Unit

Important

  • Region A icon(mainly Europe and Asia)
    A3/11 × 17 tray unit can hold A3Landscape paper only. If you want to print on A4PortraitLandscape, B4 JISLandscape, 11 × 17Landscape, 81/2 × 14Landscape, or 81/2 × 11PortraitLandscape, contact your service representative.

  • Region B icon(mainly North America)
    A3/11 × 17 tray unit can hold 11 × 17Landscape paper only. If you want to print on A3Landscape, A4PortraitLandscape, B4 JISLandscape, 81/2 × 14Landscape, or 81/2 × 11PortraitLandscape, contact your service representative.

  • Check the paper edges are aligned at the right side.

1Carefully pull out the paper tray until it stops.

Tray 1 illustration

2Square the paper and load it print side down.

Do not stack paper over the limit mark.

Tray 1 illustration

3Carefully push the paper tray fully in.

PreviousNext