Current Machine Status

Add staples (Booklet: Back)

The staple of booklet finisher (back) is exhausted.

Add staples (Booklet: Both)

The staple of booklet finisher is exhausted.

Add staples (Booklet: Front)

The staple of booklet finisher (front) is exhausted.

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Configuring...

Setting is being changed.

Cover Open: Finisher Front

The front cover of Finisher is open.

Cover Open: Front Cover

The front cover is open.

Cover Open: Interposer Upper

The interposer cover is open.

Cover Open: LCT Cover

The cover of the large capacity tray is open.

Cover Open: Mailbox

The mailbox cover is open.

Cover Open: FoldUnit Front Cover

The front cover of folding unit is open.

Current Job Suspended

The current job is suspended.

Empty: Black Toner

The black toner cartridge is almost empty.

Energy Saver Mode

The machine is in Energy Saver Mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description language.

Error: Rem. Certificate Renewal

An error has occurred in the remote server renewal.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Board

An error has occurred although you can access to the board to which Bluetooth interface unit is connected.

Error: Wireless Card

There is a problem with IEEE802.11a/g interface unit or Bluetooth interface unit, or they are not supported.

Full: Copy Tray

The copy tray is full.

Full: Finisher Booklet Tray

Booklet tray of Finisher is full.

Full: Finisher Shift Tray

Shift tray of Finisher is full.

Full: Finisher Upper Tray

Finisher's upper tray is full.

Full: Folding Unit Tray

The folding unit tray is full.

Full: Hole Punch Receptacle

Punch Chip receptacle for hole punch is full.

Full: Mailbox Tray x

The mailbox tray x is full.

Full: Waste Toner

The waste toner is full.

Hex Dump Mode

It is a hex dump mode.

In Use: Folding Unit

Other functions is using the folding unit.

In Use: Input Tray

Other functions is using the input tray.

In Use: Staple Unit

Other functions is using the staple unit.

Jobs Suspended

All jobs are suspended.

Low: Toner

The toner cartridge is not set correctly, or toner is almost running out.

Malfunction: Booklet Fin Stapler

There is a problem with the booklet finisher stapler.

Malfunction: Booklet Processor

There is a problem with the booklet processor.

Malfunction: Finisher

There is a problem with the finisher.

Malfunction: Finisher Stapler

There is a problem with the finisher stapler.

Malfunction: Finisher Tray

There is a problem with the finisher tray.

Malfunction: Folding Unit

There is a problem with the folding unit.

Malfunction: Interposer

There is a problem with the interposer.

Malfunction: LCT

There is a problem with the large capacity tray.

Malfunction: Multi-hole Punch

There is a problem with the multi-hole punch unit.

Malfunction: Output Tray

There is a problem with the output tray.

Malfunction: Tray 1

There is a problem with tray 1.

Malfunction: Tray 2

There is a problem with tray 2.

Malfunction: Tray 3

There is a problem with tray 3.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

Nearly Full: Waste Toner

Waste toner bottle is nearly full.

Need more Staples

Stapler has almost run out of staples.

No Paper: Selected Tray

There is no paper in specified tray.

Not Detected: B2 Lever

The B2 lever is not correctly set.

Not Detected: Input Tray

The paper feed tray is not correctly set.

Offline

Machine is offline.

Paper in Aligner Tray

The paper remains in the aligner tray.

Paper in Duplex Unit

The paper remains in the duplex unit.

Paper in Finisher

The paper remains in Finisher.

Paper in Folding Unit

The paper remains in the folding unit.

Paper Misfeed: Duplex Feed Unit

The paper has jammed in Duplex Feed Unit.

Paper Misfeed: Finisher

The paper has jammed in Finisher.

Paper Misfeed: Folding Unit

The paper has jammed in the folding unit.

Paper Misfeed: Input Tray

The paper has jammed in the input tray.

Paper Misfeed: Internal/Output

The paper has jammed inside the machine.

Paper Misfeed: Interposer

The paper has jammed in interposer unit.

Paper Misfeed: Mailbox

The paper has jammed in mailbox.

Paper Misfeed: Output Tray

The paper has jammed in output tray.

Paper Misfeed:Booklet Processor

The paper has jammed in booklet processor.

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

RC Gate Connection Error

RC Gate communication error has occurred.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

Replace Cleaning Web

It is time to replace the Cleaning Web.

Reset IPDS fonts

An IPDS font error occurred.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Suspend / Resume Key Error

Finisher stop button was pressed.

Tray Error: Chaptering

The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.