Previous
This section explains how to set defaults for the initial screen, which appears when the machine is turned on or when settings are cleared or reset.
The following settings can be registered as defaults:
Copier:
Original type, density, Special Original, paper tray, Store File (except for User Name and Password), Create Margin, Finishing, Cover/Slip Sheet, Edit / Stamp, Dup./Combine/Series, Reduce / Enlarge, number of copies
Document Server:
Initial document print screen
2 Sided Copy Top to Top, 2 Sided Copy Top to Bottom, Booklet, Magazine, Finishing, Cover/Slip Sheet (except for Main Sheet Tray in Designate / Chapter), Edit / Stamp, number of prints
Initial scan original screen
Original type, density, Special Original, paper tray, Create Margin, File Info (except for User Name and Password), Edit Image, Duplex/Combine, Reduce / Enlarge
Facsimile:
Scan Settings, density, Original Feed Type, File Type, Store File (except for User Name and Password), Preview, transmission type, destinations (except for folder destinations), Select Line, Adv.Features, memory transmission/immediate transmission, TX Status Report, TX Mode (except for Subject)
Scanner:
Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings), Select Stored File, Store File (except for User Name and Password), Preview, Text, Subject, Security, Recept. Notice
This section explains how to change the default functions of the initial copy screen.
Specify scan settings and any other settings you require on the initial copy screen.
Press the [Program] key.
Press [Program as Defaults].
Press [Program].
Press [Yes].
To restore the factory default settings on the initial screen, press [Restore Factory Defaults] in step 4, and then press [Yes].
The default settings can be programmed separately for the normal and simple screens.
