The network interface module settings can be displayed using the commands below.
telnet : Use the “show” command.
Item name |
Meaning |
---|---|
Common |
|
Mode |
|
Protocol Up/Down |
“Up” means active; “Down” means inactive. |
TCP/IP |
|
SMB |
|
Ethernet interface |
|
Syslog priority |
|
NVRAM version |
|
Device name |
|
Comment |
|
Location |
Internal version number |
Contact |
|
Soft switch |
Internal version number |
TCP/IP |
|
Mode |
“Up” means active, “Down” means inactive. |
ftp |
|
lpr |
|
telnet |
|
diprint |
|
web |
|
http |
|
ftpc |
|
snmp |
|
ipp |
|
autonet |
|
EncapType |
Frame type |
DHCP |
Dynamic Host Configuration Protocol |
Address |
IP address |
Netmask |
Subnet mask |
Broadcast |
Broadcast address |
Gateway |
Default gateway address |
AccessRange[ |
Access Control Range |
SYSLOG server |
|
Home page URL |
URL of homepage |
Home page link name |
URL name of homepage |
Help page URL |
URL of Help page |
SNMP protocol |
Protocol used with SNMP |
SMB |
|
Switch |
|
Mode |
(this value is fixed) |
Direct print |
(this value is fixed) |
Notification |
Notification of print job completion |
Workgroup name |
Name of the workgroup |
Computer name |
Name of the computer |
Comment |
Comment |
Share name[1] |
Share name (name of the printer type) |
Protocol |
|
DNS |
|
Server[ |
DNS server address |
use DHCP parameters |
|
Domain name |
|
ether |
Ethernet interface domain name |
WINS |
|
ether |
Ethernet interface WINS name |
Primary WINS |
Primary WINS server address |
Secondary WINS |
Secondary WINS server address |
Primary WINS |
Primary WINS server address |
Secondary WINS |
Secondary WINS server address |
Shell mode |
Mode of the remote maintenance tool |
*1 represents a target number between 1 and 5.
*2 represents a target number between 1 and 3.