Use the “autonet” command to configure AutoNet settings.
Display
The following command displays the current AutoNet settings.
msh> autonet
Configuration
You can configure the AutoNet settings.
msh> autonet interface_name [on | off]
Select [on] to enable AutoNet.
Select [off] to disable AutoNet.
Interface Priority Configuration
You can assign priorities governing which interface obtains AutoNet parameters.
msh> autonet priority interface_name
Priority assignment is useful when connecting more than one interface to the printer.
If an interface is not selected, the interface appears according to the currently set priority, regardless of multiple interface connections.
Interface name |
Interface to be configured |
---|---|
ether |
Ethernet interface |
For details about AutoNet, see Using DHCP.