Going to the Top Page

You can remotely check the status of a printer or specify its settings over the network using a computer's Web browser.

The following functions are available with Web Image Monitor:

• Displaying printer status/settings

• Checking print job status and history, or deleting the print job

• Making printer settings

• Network protocol settings

• Security settings

This requires TCP/IP to be installed. After the printer has been configured to use TCP/IP, it will be possible to adjust settings using a Web Image Monitor.

For details about configuring the printer to use TCP/IP, see Setting Up the Machine on a Network.

• Microsoft Internet Explorer 6.0 or higher

• Firefox 2.0 or higher

If the Web browser in use is older than the recommended version or [JavaScript] and [Cookie] are not available, display and operation problems may occur.

If you are using a proxy server, change the Web browser settings. Consult your network administrator about the settings.

Sometimes after clicking [Back], the previous page may not appear. In this case, click [Refresh] or [Reload].

This printer information cannot be refreshed automatically. Click [Reload] or [Refresh] on the Web browser, or click [Refresh] on the work area when you want to refresh the printer information.

In the [Address] box, enter the address (for example http://XXX.XXX,XXX,XXX, where the Xs are the numbers of the IP address).

If the host name of the printer is registered on the DNS server or WINS server, you can enter it.