Settings You Can Change with User Tools
DHCP
You can make settings under a DHCP environment. If you have set [DHCP] to [ON], you cannot specify [IP Address], [Subnet Mask], or [Gateway Address].
ON
OFF
Default: ON
IP Address
You can specify [IP Address]. If you specify [IP Address], set [DHCP] to [OFF].
Default: 011.022.033.044
Specify a unique IP address - not the same as any other on the network.
Subnet Mask
Be sure to specify [Subnet Mask] before using the printer. If you specify [Subnet Mask], set [DHCP] to [OFF].
Default: 000.000.000.000
Gateway Address
A gateway is a connection or interchange point between two networks. Configure the gateway address for the router or host computer used as a gateway.
When you configure [Gateway Address], set [DHCP] to [OFF].
Default: 000.000.000.000
Ethernet Speed
Set the access speed for networks.
Select a speed that matches your network environment. [Auto] should usually be selected.
Auto
10Mbps
100Mbps
Default: Auto
