Configuring the network using the control panel
Operations for System Settings are different from normal operations. After using User Tools, press the [User Tools] key to exit.
If the key operator code has been set, the key operator code entry screen appears. Enter the code, and then press the [OK] key. For details about the key operator code, see Operating Instructions.
Press the [User Tools] key.
Select [Online Paramet's] using the [
] or [
] keys, and then press the [OK] key.
Select the setting you want to change, and then press the [OK] key.
Change the setting, and then press the [OK] key.
Press the [Escape] key to cancel the setting.
Press the [User Tools] key.
Turn the main switch off and on.
