Skip header
 

Preparing the Machine for a Long Period of Inactivity

Use this procedure to prepare the machine for a long period of inactivity with its power switch turned off.

Note that not using the following procedure could result in unusual noises when use of this machine is resumed.

Important

  • Do not switch off the machine during printing.

1Turn off the power switch.

Machine side view illustration

2Pull out the plug from the socket.

Machine rear view illustration

3Open the rear cover.

Machine rear view illustration

4Lower the levers for printing envelopes on both side to the position indicated with an envelope mark.

Machine interior illustration

5Close the rear cover.

Machine rear view illustration

Note

  • This step is not necessary if the machine's power switch is on but the machine has been inactive for a long time.