Click the [Network Application] tab on the network settings page to configure the network application settings.
Item |
Description |
---|---|
Select to enable the Scan to E-mail feature. |
|
Max. E-mail Size |
Select the maximum size of scan files that can be attached to an e-mail message (1 to 5 MB, or no limit). |
FTP |
Select to enable the Scan to FTP feature. |
Folder |
Select to enable the Scan to Folder feature. |
Item |
Description |
---|---|
IPP |
Select to enable network printing using Internet Print Protocol (via TCP port 631/80). |
FTP |
Select to enable network printing using an embedded FTP server in the machine (via TCP port 20/21). |
RAW |
Select to enable network raw printing. |
Port No. |
Enter the TCP port number to use for raw printing. The valid range is 1024 to 65535, except 53550 and 49999 (default is 9100). |
LPR |
Select to enable network printing using LPR/LPD (via TCP port 515). |
Item |
Description |
---|---|
mDNS |
Select to enable Multicast DNS (via UDP port 5353). If disabled, the item below cannot be configured. |
Printer Name |
Enter the name of the machine. Can contain up to 32 characters. |