This section describes the printer feature setting parameters.
Some items might not appear, depending on the model type you are using.
List/Test Print
Prints lists showing configurations on the machine.
[Duplex Test Page] appears only for the Type 2 model.
The lists will be printed on A4 or Letter size paper.
Config. Page
Prints general information and the current configurations of the machine.
Menu List
Prints the machine's function menus.
Test Page
Prints a test page for checking the single-sided printing condition. The test page contains network settings.
PCL Font List
Prints installed PCL font list.
PS Font List
Prints installed PostScript font list.
Duplex Test Page
Prints a test page for checking the duplex printing condition. The test page contains network settings.
System
Copies
Sets the machine to print the specified number of sets.
This setting is disabled if the number of pages to print is specified by the printer driver.
Default: 1
1 to 999
Sub Paper Size
Sets the machine to print onto paper of another size if the specified paper is not loaded in any tray. Alternative sizes are preset to A4 and Letter.
Default: [Off]
Auto
Off
Default Page Size
Specifies the paper size to be used when the paper size is not specified in the print job.
Default: [A4], [8 1/2 × 11]
A4, B5 JIS, A5, B6 JIS, A6, 8 1/2 × 14, 8 1/2 × 11, 5 1/2 × 8 1/2, 7 1/4 × 10 1/2, 8 × 13, 8 1/2 × 13, 8 1/4 × 13, 16K, 4 1/8 × 9 1/2, 3 7/8 × 7 1/2, C5 Env, C6 Env, DL Env
Duplex
Sets the machine to print on both sides of paper according to the specified binding method.
Default: [None]
None
Long Edge Bind
Short Edge Bind
Blank Page Print
Sets the machine to print blank pages.
When cover sheet printing is enabled from the printer driver, cover sheets are inserted even if you select [Off].
Note that this setting has lower priority than the printer driver's blank page setting ([Do not Print Blank Pages] on the [Setup] tab of the PCL6 printer driver, or [Print Blank Pages] under [Printer Features] of the PostScript 3 printer driver).
Default: [On]
On
Off
Print Error Report
Sets the machine to print an error page when the machine detects a printer or memory error.
Default: [Off]
On
Off
PCL Menu
Specifies conditions when using PCL for printing.
Orientation
Specifies the page orientation.
Default: [Portrait]
Portrait
Landscape
Form Lines
Specifies the number of lines per page.
Default: 64, 60
5 to 128
Font Number
Specifies the ID of the default font you want to use.
Default: 0
0 to 89
Point Size
Specifies the point size for the default font.
This setting is effective only for a variable-space font.
Default: 12.00 points
4.00 to 999.75 (you can use the [][] keys to change the value in 0.25 increments)
Font Pitch
Specifies the number of characters per inch for the default font.
This setting is effective only for fixed-space fonts.
Default: 10.00 pitch
0.44 to 99.99
Symbol Set
Specifies the character set for the default font. The following sets are available:
Default: [PC-8]
Roman-8, Roman-9, ISO L1, ISO L2, ISO L5, PC-8, PC-8 D/N, PC-850, PC-852, PC-858, PC8-TK, Win L1, Win L2, Win L5, Desktop, PS Text, VN Intl, VN US, MS Publ, Math-8, PS Math, VN Math, Pifont, Legal, ISO 4, ISO 6, ISO 11, ISO 15, ISO 17, ISO 21, ISO 60, ISO 69, Win 3.0, MC Text, ISO L6, ISO L9, PC-775, PC-1004, Win Baltic
Courier Font
Specifies a courier-type font.
Default: [Regular]
Regular
Dark
Ext. A4 Width
Sets the machine to extend the width of the printable area of A4 size paper, reducing side margin width.
Default: [Off]
On
Off
Append CR to LF
Sets the machine to append a CR code to each LF code to print text data clearly.
Default: [Off]
On
Off
Resolution
Specifies the print resolution in dots per inch.
Default: [600 × 600 dpi]
600 × 600 dpi
PS Menu
Specifies conditions when using PostScript for printing.
Resolution
Specifies the print resolution in dots per inch.
Default: [600 × 600 dpi]
600 × 600 dpi
1200 × 600 dpi
1200 × 1200 dpi