Skip header
 

Fax Transmission Setting Parameters

This section describes fax transmission setting parameters.

Immediate TX

Sets the machine to send a fax immediately when the original is scanned.

Default: [Off]

  • Off

    Select this when using Memory Transmission.

  • On

    Select this when using Immediate Transmission.

  • Next Fax Only

    Select this when using Immediate Transmission for the next transmission only.

Resolution

Specifies the resolution to use for scanning originals.

The “Photo” resolution is not available for Internet Faxes. Faxes will be sent using “Detail” resolution if “Photo” resolution has been specified.

Default: [Standard]

  • Standard

    Select this when the original is a printed or typewritten document with normal-sized characters.

  • Detail

    Select this when the original is a document with small print.

  • Photo

    Select this when the original contains images such as photographs or shaded drawings.

Density

Specifies the image density to use for scanning originals.

Default: [Normal]

  • Light

  • Normal

  • Dark

Pause Time

Specifies the length of pause time when a pause is inserted between the digits of a fax number.

Default: 3 seconds

  • 1 to 15 seconds

Auto Redial

Sets the machine to redial the fax destination automatically when the line is busy or a transmission error occurs, if the machine is in Memory Transmission mode. The number of redial attempts is preset to two or three times, depending on the [Country] setting under [Admin. Tools], in five-minute intervals.

Default: [On]

  • Off

  • On

Print Fax Header

Sets the machine to add a header to every fax you send. The header includes the current date and time, user fax name and fax number of the machine, job ID, and page information.

Default: [On]

  • Off

  • On

Original

Specifies the sides of the original (1 side or 2-sides) for scanning when using the ARDF in Memory Transmission mode.

When scanning 2-sides of original, specify the page and binding orientations according to those of the originals.

This setting only appears when the machine is in Memory Transmission mode for the Type 2 model.

Default: [1 Sided]

  • 1 Sided

  • 2 Sided Portrait: T to T

  • 2 Sided Portrait: T to B

  • 2 Sided Landscape: T to T

  • 2 Sided Landscape: T to B