Modifying Scan Destinations
This section describes how to modify the information of registered destinations.
Start the Web browser, and access the machine by entering its IP address.
Click [Scan Destination].
Click the [E-mail Address], [FTP], or [Folder] tab.
Select the entry to modify, and then click [Change].
Modify settings as necessary.
Enter the administrator password if required.
Click [Apply].
Close the Web browser.
You can unassign a Quick Dial entry from a One-touch button from the [Quick Dial Destination] page. To do this, select the desired entry, click [Delete], and then click [Apply] again on a confirmation page.
The machine will notify you if the destination you want to modify is set as a forwarding destination of received faxes.
For details about using Web Image Monitor, see Using Web Image Monitor
.For details about fax forwarding settings, see Configuring the Fax Settings
.
