Connecting to a Telephone Line

You can connect the machine to the public switched telephone network (PSTN) directly or through a private branch exchange (PBX).

Also, you can connect an external telephone to use the same telephone line for voice calls.

To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.

Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.

: By law in the United States, you must program your phone number identification (your fax number) into your machine before you can connect to the public phone system.
Make sure the connector is the correct type before you start.

Connect a telephone line cord to LINE.

Machine illustration

If using an external telephone, connect the telephone to TEL.

Machine illustration

After connecting the machine to the telephone line, configure the telephone network settings and fax reception mode.
If your telephone has functions that are not compatible with this machine, those functions will not be usable.
Confirm that you have registered user fax number and user name during Initial Setup. You can check the registered information in [Program Fax Information] under [Admin. Tools].

For details about registering fax sender information, see Administrator Settings .
For details about configuring the telephone network settings, see Configuring Telephone Network Settings .
For details about configuring fax reception mode, see Selecting Reception Mode .
For details about [Program Fax Information], see Administrator Settings .