Skip header
 

Top Page > Guide to the Machine > Guide to Components > Exterior: Front View (Type 1 model)

Exterior: Front View (Type 1 model)

Front view numbered callout illustration

  1. ADF (Auto Document Feeder) Cover

    Open this cover to remove originals jammed in the ADF.

  2. Input Tray for the ADF

    Place stacks of originals here. They will feed in automatically. This tray can hold up to 35 sheets of plain paper.

  3. Output Tray for the ADF

    Originals scanned with the ADF are output here.

  4. Extender for the ADF Trays

    Extend these when placing paper longer than A4 in the input tray for ADF.

  5. Stop Fences

    Raise this fence to prevent paper from falling off.

  6. Front Cover

    Open this cover to replace the print cartridge or remove jammed paper.

  7. Tray 2 (option)

    This tray can hold up to 250 sheets of plain paper.

  8. Tray 1

    This tray can hold up to 250 sheets of plain paper.

  9. Bypass Tray

    This tray can hold up to 50 sheets of plain paper.

  10. Output Tray

    Printed paper is output here. Up to 125 sheets of plain paper can be stacked here.

  11. USB Flash Disk Port

    Insert a USB flash disk to store scanned files using the Scan to USB function.

  12. Control Panel

    Contains a screen and keys for machine control.

  13. Exposure Glass

    Place originals here sheet by sheet.

  14. Cover for the Exposure Glass

    Open this cover to place originals on the exposure glass.