Skip header
 

Inserting/Removing a Memory Storage Device

Important

  • Do not turn off the main power switch while the machine is saving data to a removable memory device. Doing so may damage the device. If you turned off the main power switch while data was being saved, be sure to check whether the data in your device was saved correctly.

  • This machine supports SD cards with a maximum capacity of 32 GB.

Note

  • If the media access lamp does not light when a removable memory device is pushed into the media slot, do the following:

    • Reinsert the removable memory device.

    • The removable memory device may be broken. Contact the shop where you bought it.