Skip header
 

Reduce/Enlarge

When scanning a bundle of mixed size originals, you can unify the size of the scanned data by using [Specify Size].

Entering Values in the Reduce/Enlarge Configuration Screen

Operation panel screen illustration numbered callout illustration

  1. Specify Reproduction Ratio

    Enter a value for the reproduction ratio.

    To make a small adjustment to the reproduction ratio value, press [+] or [-].

    To make a large change to the value, enter the desired value using the [Number keys], and then press [Sharp] key.

    To use a pre-defined reproduction ratio, press the desired ratio.

  2. Specify Size

    Specify the finished size of the scanned originals.

    Press [Specify Size], and then specify the finished size of the scanned originals.

    To select [Custom Size] for the finished size of the scanned originals, enter the value of [Short Edge] and [Long Edge] of the scan size using the number keys.

Note

  • [High Compress. PDF] cannot be selected if the [Reduce/Enlarge] function is used.

  • For details about how to edit the pre-defined reproduction ratio, see General Settings.

  • [Reduce/Enlarge] cannot be specified if [LT/LG Mixed Sizes] is used.

PreviousNext