Specifications for the Main Unit

Desktop

OPC drum

One-dimensional solid scanning system through CCD

Laser beam scanning and dry electrostatic transfer system

Dry two-component magnetic brush development system

Heating roll pressure system

• Scanning:

  Exposure glass: 600 × 600 dpi

  ADF: 600 × 300 dpi

• Printing:

  600 × 600 dpi

Stationary original exposure type

Rear left corner

30 seconds

Sheet, book, three-dimensional object

216 × 356 mm (8.5 × 14 inches)

• Tray 1:

  A4, A5, B5 JIS, 8¹/₂ × 11, 8¹/₂ × 5¹/₂, 16K

• Bypass tray:

  A4, A5, A6, B5 JIS, B6 JIS, 8¹/₂ × 14, 8¹/₂ × 13, 8¹/₂ × 11, 8¹/₄ × 14, 8¹/₄ × 13, 8 × 13, 7¹/₄ × 10¹/₂, 5¹/₂ × 8¹/₂,

  4¹/₈ × 9¹/₂, 3⁷/₈ × 7¹/₂, C5 Env, C6 Env, DL Env, 16K

• Bypass tray (custom size):

  Vertical: 90.0–216.0 mm (3.55–8.50 inches)

  Horizontal: 139.0–600.0 mm (5.48–23.62 inches)

• Duplex:

  A4, B5 JIS, 8¹/₂ × 14^*, 8¹/₂ × 13^*, 8¹/₂ × 11, 8¹/₄ × 14^*, 8¹/₄ × 13^*, 16K

  * A paper tray unit is required.

• Tray 1: 60–90 g/m² (16–24 lb. Bond)

• Bypass: 60–157 g/m² (16–40 lb. Bond)

• Duplex: 64–90 g/m² (17–24 lb. Bond)

For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.

• Leading edge: 3 ± 2 mm (0.12 ± 0.08 inches)

• Trailing edge: 3 ± 2 mm (0.12 ± 0.08 inches) (4.2 ± 2 mm (0.17 ± 0.08 inches) in Duplex mode)

• Left edge: 2 ± 1.5 mm (0.08 ± 0.06 inches)

• Right edge: 2 + 2.5/-1.5 mm (0.08 + 0.1/-0.06 inches)

• 5.4 seconds (A4, 100% reproduction, feeding from tray 1, on the exposure glass)

• 5.3 seconds (8¹/₂ × 11, 100% reproduction, feeding from tray 1, on the exposure glass)

• 30 sheets/minute (A4)

• 31 sheets/minute (8¹/₂ × 11)

• Preset reproduction ratios (%)(mainly Europe and Asia):

  • Enlargement: 200, 141

  • Full size: 100

  • Reduction: 93, 71, 50

• Preset reproduction ratios (%)(mainly North America):

  • Enlargement: 155, 129

  • Full size: 100

  • Reduction: 93, 78, 65

• Zoom: From 25 to 400% in increments of 1%

99 sheets

• Tray 1: 250 sheets

• Bypass tray: 100 sheets

• (mainly Europe and Asia)

  220–240 V, 4.5 A, 50/60 Hz

• (mainly North America)

  120–127 V, 9 A, 60 Hz

• Main unit only

  	Type 1	Type 2
  Ready	90 W	90 W
  During printing	449 W 456 W	450 W 461 W
  Maximum	1,100 W	1,100 W

  The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less

• Complete system

  	Type 1	Type 2
  Maximum	1,100 W	1,100 W

  • The complete system of type 1 consists of the main unit, ADF, two paper tray units, HDD, fax unit, optional anti-humidity heater, and Gigabit Ethernet.

  • The complete system of type 2 consists of the main unit, ADF, two paper tray units, HDD, optional anti-humidity heater, and Gigabit Ethernet.

• W × D × H up to exposure glass (mainly Europe):

  476 × 450 × 371 mm (18.8 × 17.8 × 14.7 inches)

• W × D × H up to ADF (mainly Asia):

  476 × 450 × 451 mm (18.8 × 17.8 × 17.8 inches)

• W × D × H up to ADF (mainly North America):

  476 × 450 × 451 mm (18.8 × 17.8 × 17.8 inches)

• 716 × 471 mm (28.2 × 18.6 inches) (when the control panel is vertical)

• 716 × 478 mm (28.2 × 18.9 inches) (when the control panel is horizontal)

• Sound power level:

  	Main unit only	Complete system
  Stand-by	Less than 40.0 dB (A)	Less than 40.0 dB (A)
  Copying	Less than 66.5 dB (A)	Less than 70.5 dB (A)

• Sound pressure level:

  	Main unit only	Complete system
  Stand-by	Less than 34.0 dB (A)	Less than 34.0 dB (A)
  Copying	Less than 60.5 dB (A)	Less than 64.5 dB (A)

  • Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.

  • Sound pressure level is measured from the position of the bystander.

  • The complete system consists of the main unit, ADF, and two paper tray units.

• (mainly Europe):

  Approx. 22 kg (48.5 lb.)

• (mainly Asia):

  Approx. 26 kg (57.4 lb.)

• (mainly North America):

  Approx. 26 kg (57.4 lb.)