Skip header
 

Auto Color Calibration

1Press the [User Tools / Counter] key.

User Tools/Counter key illustration

2Press [Maintenance].

3Press [Auto Colour Calibration].

4Press [Start].

To perform auto color calibration using the copy function, press [Start] in Copier Function. To perform auto color calibration using the printer function, press [Start] in Printer Function.

5Press [Start Printing].

  • When performing auto color calibration using the printer function

    Select test patterns from [Test Pattern 1 (600 multiplication 600 dpi)], [Test Pattern 2 (1800 multiplication 600 dpi)], [Test Pattern 3 (9000 multiplication 600 dpi)], or [Test Pattern 4 (1200 multiplication 1200 dpi)], and then press [Start Printing].

    Operation panel screen illustration

6Place the test pattern on the exposure glass, and then press [Start Scanning].

Note

  • The test pattern will not be read if it is set into the ADF.

  • The test pattern will be printed on an A4, 81/2 multiplication 11 size page. If A4 is not available, A3 or B4 JIS (Japanese Industrial Standard) will be used. Make sure to check the paper set into the paper tray.

  • Set the test pattern in the following way:

    Illustration of setting the test pattern

  • Make sure to set the test pattern on the exposure glass, and then two or three white sheets, same size as the test pattern, above the test pattern.

PreviousNext