Skip header
 

Installing the Small Size Paper Tray

To use the small size paper tray, install it in tray 2, lower paper tray, or the lower paper trays. In the following example procedure, the small size paper tray is installed in tray 2.

Important

  • The small size paper tray cannot detect paper size automatically. Specify the paper size on the control panel. For details, see "Changing to a Size That Is Not Automatically Detected", Paper Specifications and Adding Paper.

1Check the contents of the package.

Small size paper tray illustration numbered callout illustration

  1. Small size paper tray

2Remove the packaging from the small size paper tray.

3Carefully pull out tray 2 until it stops, then slightly raise the front of the tray, and then pull it out completely.

Small size paper tray illustration

Store the paper tray in a safe place.

4Lift the front of the small size paper tray, and then carefully push it fully in.

Small size paper tray illustration

5Press the [User Tools/Counter] key.

User Tools/Counter key illustration

6Press [System Settings].

7Check that the [General Features] tab is selected.

8Press [Down arrow key Next].

9Press [Small Size Paper Tray].

10Press [On] for tray 2.

11Press [OK].

12Turn off the machine, and then turn it back on.

Note

  • If the small size paper tray is not installed correctly, repeat the installation procedure from the beginning. If the installation is still not correct, contact your service representative.

  • In printer mode, configure the settings for the options that are installed on the machine. For details, see the printer driver Help.