Do not obstruct the ventilation holes by placing objects near them or leaning things against them. If the machine overheats, a fault might occur.
Front and left view
ARDF or one-pass duplex scanning ADF
(The illustration shows the ARDF.)
Lower the ADF over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
The ARDF scans both sides of an original one side at a time.
The one-pass duplex scanning ADF scans both sides of an original simultaneously.
Exposure glass
Place originals face down here.
Ventilation holes
Prevent overheating.
Main power switch
To operate the machine, the main power switch must be on. If it is off, open the cover and turn the switch on.
Control panel
See Guide to the Names and Functions of the Machine's Control Panel.
Internal tray 1
Copied/printed paper and fax messages are delivered here.
Front cover
Open to access the inside of the machine.
Paper trays (trays 1–2)
Load paper here.
Lower paper trays
Load paper here.
Front and right view
Ventilation holes
Prevent overheating.
Bypass tray
Use to copy or print on OHP transparencies and label paper (adhesive labels).
Paper guides
When loading paper in the bypass tray, align the paper guides flush against the paper.
Extender
Pull this extender out when loading sheets larger than A4, 81/2 × 11 in the bypass tray.
Lower right cover
Open this cover when a paper jam occurs.
Rear and left view
Ventilation holes
Prevent overheating.
To cool the machine's interior, the fan may continue running after the machine finishes a large print job. For details, see "When You Have Problems Operating the Machine", Troubleshooting.