Previous
Select the size of the original to be scanned.
[Auto Detect]
Scans original sizes using the automatic size detect function.
[Mixed Original Sizes]
Select [Mixed Original Sizes] to scan a batch of originals that have different lengths.
Originals are scanned by the ADF and the length of each is automatically detected.
[Custom Size]
Select [Custom Size] to scan originals whose sizes do not match a standard template or to scan only a part of an original.
You can specify the length and width of your originals in mm or inches.
Template size
Select a template size to scan originals at a specified size regardless of the actual size of the originals you have placed.
You can specify the following template sizes:
A3
, A4
, A4, A5, A5, B4 JIS, B5 JIS, B5 JIS, 11 × 17, 81/2 × 14, 81/2 × 13, 81/2 × 11, 81/2 × 11, 51/2 × 81/2, 51/2 × 81/2
The [Mixed Original Sizes] function is available only if the ADF is installed on the machine. Note that in some countries, the ADF is an optional component and must be purchased separately.
Selecting both [Mixed Original Sizes] and [Erase Border] reduces the scanning speed.
You can enter 140 mm (5.5 inches) or higher in Original Size (X1 and Y1) under [Custom Size].
[Mixed Original Sizes] can be selected for paper sizes larger than B5 or 81/2 × 11.
If the size of an original placed in the ADF cannot be detected automatically, the original might be scanned at a different size. For details about paper sizes that can be automatically detected when placed in the ADF, see "Specifications for Scanner", Maintenance and Specifications.
