Skip header
 

Loading Paper into the Small Size Paper Tray

Important

  • Check the paper edges are aligned at the right side.

  • If a paper tray is pushed vigorously when putting it back into place, the position of the tray's side fences may slip out of place.

  • When loading a low number of sheets, be sure not to squeeze the side fences in too tightly. If the side fences are squeezed too tightly against the paper, the edges may crease, thin paper may wrinkle, or the paper may be misfed.

1Carefully pull out the paper tray until it stops.

Small size paper tray illustration

2Square the paper and load it print side up.

Do not stack paper over the limit mark.

Small size paper tray illustration

3Carefully push the paper tray fully in.

Note

  • For details about how to install the small size paper tray, see "Installing the Small Size Paper Tray", Getting Started.

  • Various sizes of paper can be loaded in the small size paper tray by adjusting the positions of side fences and end fence. For details, see Changing the Paper Size in the Small Size Paper Tray.

  • You can load envelopes into the small size paper tray. When loading envelopes, place them in the correct orientation. For details, see Envelopes.