Configuration:
Desktop
Photosensitivity type:
OPC drum
Original scanning:
One-dimensional solid scanning system through CCD
Copy process:
Laser beam scanning and electro-photographic printing
Development:
Dry two-component magnetic brush development system
Fusing:
Direct Heating (DH) fusing
Resolution:
Scanning originals: 600 dpi
Copying: 600 dpi
Exposure glass:
Stationary original exposure type
Original reference position:
Rear left corner
Warm-up time (23 °C (73.4 °F), rated voltage):
20 seconds
Originals:
Sheet, book, three-dimensional object
Maximum original size:
(mainly Europe and Asia)
A3
(mainly North America)
11 × 17
Paper size:
Tray 1:
A4, 81/2 × 11
, A5
, B5 JIS
The paper tray fence is fixed. If you wish to change the size of paper placed in this tray, contact your service representative.
Tray 2:
A3, A4
, A5
, B4 JIS
, B5 JIS
,
11 × 17, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
,
8K, 16K
, 11 × 15
, 10 × 14
, 41/8 × 91/2
, C5 Env
Tray 2 (custom size):
Vertical: 182.0–297.0 mm (7.17–11.69 inches)
Horizontal: 148.0–432.0 mm (5.83–17.00 inches)
Bypass tray:
A3, A4
, A5
, A6
, B4 JIS
, B5 JIS
, B6 JIS
,
11 × 17, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
,
41/8 × 91/2, 37/8 × 71/2
, C5 Env
, C6 Env
, DL Env
, 8K
, 16K
, 12 × 18
, 11 × 15
, 10 × 14
Bypass tray (custom size):
Vertical: 90.0–305.0 mm (3.55–12.00 inches)
Horizontal: 148.0–457.2 mm (5.83–18.00 inches)
In printer or facsimile mode, the maximum horizontal length of the custom size is 600.0 mm (23.62 inches).
Duplex:
A3, A4
, A5
, A6
, B4 JIS
, B5 JIS
, B6 JIS
,
11 × 17, 81/2 × 14
, 81/2 × 13
, 81/2 × 11
, 81/4 × 14
, 81/4 × 13
, 8 × 13
, 8 × 10
, 71/4 × 101/2
, 51/2 × 81/2
8K, 16K
, 11 × 15
, 10 × 14
Duplex (custom size):
Vertical: 90.0–297.0 mm (3.55–11.69 inches)
Horizontal: 148.0–432.0 mm (5.83–17.00 inches)
Paper weight:
Paper trays: 52–256 g/m2 (14 lb. Bond–140 lb. Index)
Bypass: 52–300 g/m2 (14 lb. Bond–110 lb. Cover)
Duplex: 52–169 g/m2 (14 lb. Bond–90 lb. Index)
For details about and recommendations concerning thick paper, see "Thick Paper", Paper Specifications and Adding Paper.
Non-reproduction area (Copier):
Leading edge: 4.2 ± 1.5 mm (0.17 ± 0.06 inches)
Trailing edge: 0.5–6.0 mm (0.02–0.24 inches) (3.0–6.0 mm (0.12–0.24 inches) in Duplex mode)
Left and right edges: 0.5–4.0 mm (0.02–0.16 inches)
First copy/print time:
Type 1
Full Color: 7.3 seconds
B&W: 4.8 seconds
Type 2
Full Color: 7.3 seconds
B&W: 4.8 seconds
(A4, 81/2 × 11
, 100% reproduction, feeding from tray 1, on the exposure glass)
Copy/print speed (Full Color / B&W):
Type 1: 30 sheets/minute (A4, 81/2 × 11
)
Type 2: 35 sheets/minute (A4, 81/2 × 11
)
Reproduction ratio:
(mainly Europe and Asia)
Preset reproduction ratios (%):
Enlargement: 400, 200, 141, 122, 115
Full size: 100
Reduction: 93, 82, 75, 71, 65, 50, 25
(mainly North America)
Preset reproduction ratios (%):
Enlargement: 400, 200, 155, 129, 121
Full size: 100
Reduction: 93, 85, 78, 73, 65, 50, 25
Zoom: From 25 to 400% in increments of 1%
Maximum continuous copy run:
999 sheets
Paper capacity (80 g/m2, 20 lb. Bond):
Tray 1, 2: 550 sheets
Bypass tray: 100 sheets
Power requirements:
(mainly Europe and Asia)
220–240 V, 8 A, 50/60 Hz
(mainly North America)
120–127 V, 12 A, 60 Hz
Power consumption:
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Ready |
90 W
92 W |
90 W
92 W |
During printing |
631 W
640 W |
673 W
678 W |
Maximum |
1.7 kW
1,584 W |
1.7 kW
1,584 W |
The power level when the main switch is turned off and the power cord is plugged into an outlet: 1 W or less
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Maximum |
1.7 kW
1,584 W |
1.7 kW
1,584 W |
The complete system consists of the main unit, internal tray 2, lower paper trays, large capacity tray (LCT), bridge unit, Booklet Finisher SR3100, fax unit, two extra G3 interface units, Copy Data Security unit, Gigabit Ethernet, File format converter, and Wireless LAN board.
Dimensions (W × D × H up to ARDF):
670 × 682 × 880 mm (26.4 × 26.9 × 34.7 inches)
Space for main unit (W × D) (when the control panel is tilted 62 degrees):
1,065 × 734 mm (42.0 × 28.9 inches) (including the bypass tray and output trays)
Noise emission:
Sound power level:
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
Less than 32.9 dB (A) |
Less than 33.4 dB (A) |
Copying |
Less than 64.4 dB (A) |
Less than 64.5 dB (A) |
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
Less than 34.1 dB (A) |
Less than 33.8 dB (A) |
Copying |
Less than 70.1 dB (A) |
Less than 70.1 dB (A) |
Sound pressure level:
Main unit only
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
Less than 21.7 dB (A) |
Less than 20.3 dB (A) |
Copying |
Less than 50.9 dB (A) |
Less than 50.9 dB (A) |
Complete system
Type 1 |
Type 2 |
|
---|---|---|
Stand-by |
Less than 20.2 dB (A) |
Less than 20.3 dB (A) |
Copying |
Less than 55.3 dB (A) |
Less than 55.4 dB (A) |
Sound power level and sound pressure level are actual values measured in accordance with ISO 7779.
Sound pressure level is measured from the position of the bystander.
The complete system consists of the main unit, lower paper trays, internal tray 2, large capacity tray (LCT), bridge unit, and Booklet Finisher SR3100.
Weight:
Approx. 120 kg (264.6 lb.)