This section describes the user tools in the User Stamp menu under [Stamp].
Program / Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favorite designs.
For details about how to register, change, or delete the user stamp, see Registering a user stamp or Deleting the user stamp.
Stamp Format:1–4
Specify how each of registered user stamps 1 to 4 is printed.
Stamp Position
Specify where to print the user stamp. For details about the stamp position, see Stamps.
Default: [Top Right]
Adjust Stamp Position
You can adjust the position in which the stamp is printed.
The position where the stamp is printed and the range within which that position can be adjusted are shown in the following table. The values for defaults and possible ranges given in the table are the distance from each side of the paper.
(mainly Europe and Asia)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
24 mm from the left edge 24 mm from the top edge |
From 4 to 144 mm from the left edge From 4 to 144 mm from the top edge |
Top Centre |
Center 24 mm from the top edge |
From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the top edge |
Top Right |
24 mm from the right edge 24 mm from the top edge |
From 4 to 144 mm from the right edge From 4 to 144 mm from the top edge |
Centre Left |
24 mm from the left edge Center |
From 4 to 144 mm from the left edge From 0 to 72 mm to the toward the top or bottom of the center |
Centre |
Center |
From 0 to 72 mm to the toward the top or bottom of the center From 0 to 72 mm to the right or left of the center |
Centre Right |
24 mm from the right edge Center |
From 4 to 144 mm from the right edge From 0 to 72 mm to the toward the top or bottom of the center |
Bottom Left |
24 mm from the left edge 24 mm from the bottom edge |
From 4 to 144 mm from the left edge From 4 to 144 mm from the bottom edge |
Bottom Centre |
Center 24 mm from the bottom edge |
From 0 to 72 mm to the right or left of the center From 4 to 144 mm from the bottom edge |
Bottom Right |
24 mm from the right edge 24 mm from the bottom edge |
From 4 to 144 mm from the right edge From 4 to 144 mm from the bottom edge |
(mainly North America)
Stamp positions |
Default |
Possible range |
---|---|---|
Top Left |
1.0 inches from the left edge 1.0 inches from the top edge |
From 0.1 to 5.7 inches from the left edge From 0.1 to 5.7 inches from the top edge |
Top Center |
Center 1.0 inches from the top edge |
From 0 to 2.8 inches to the right or left of the center From 0.1 to 5.7 inches from the top edge |
Top Right |
1.0 inches from the right edge 1.0 inches from the top edge |
From 0.1 to 5.7 inches from the right edge From 0.1 to 5.7 inches from the top edge |
Center Left |
1.0 inches from the left edge Center |
From 0.1 to 5.7 inches from the left edge From 0 to 2.8 inches to the toward the top or bottom of the center |
Center |
Center |
From 0 to 2.8 inches to the toward the top or bottom of the center From 0 to 2.8 inches to the right or left of the center |
Center Right |
1.0 inches from the right edge Center |
From 0.1 to 5.7 inches from the right edge From 0 to 2.8 inches to the toward the top or bottom of the center |
Bottom Left |
1.0 inches from the left edge 1.0 inches from the bottom edge |
From 0.1 to 5.7 inches from the left edge From 0.1 to 5.7 inches from the bottom edge |
Bottom Center |
Center 1.0 inches from the bottom edge |
From 0 to 2.8 inches to the right or left of the center From 0.1 to 5.7 inches from the bottom edge |
Bottom Right |
1.0 inches from the right edge 1.0 inches from the bottom edge |
From 0.1 to 5.7 inches from the right edge From 0.1 to 5.7 inches from the bottom edge |
Page to Stamp
You can have the stamp printed on the first page or all pages.
Default: [All Pages]
Stamp Colour: 1–4
You can select the priority of the colors for user stamp (1 to 4).
Default: [Black]
For details about how to change the Copier / Document Server Features, see "Changing Default Settings", Connecting the Machine/ System Settings.