Previous
This section describes how to copy onto regular size and custom size envelopes. Envelopes should be fed from the bypass tray or paper tray.
Specify the thickness of the paper according to the weight of the envelopes you are printing on. For details about the relationship between paper weight and paper thickness and the sizes of envelopes that can be used, see "Recommended Paper Sizes and Types", Paper Specifications and Adding Paper.
About handling envelopes, supported envelope types, and how to load envelopes, see Paper Specifications and Adding Paper for details
.
The Duplex function cannot be used with envelopes. If the Duplex function is specified, press [1 sided
2 sided:TtoT] to cancel the setting.
To copy onto custom size envelopes, you must specify the envelope's dimensions. Specify the horizontal and vertical length of the envelope.
: Horizontal
: Vertical
Be sure to include the fully open flap in the horizontal dimension.
