Skip header
 

Copying onto Thick Paper

Important

  • The Duplex function cannot be used if you use Thick Paper 2, 3, or 4. If the Duplex function is specified, press [1 sided 2 sided:TtoT] to cancel the setting.

Select the paper type according to the paper weight when copying onto thick paper.

1Load the paper face down in the bypass tray.

[Bypass] is automatically selected.

2Press the [Sharp] key.

3Press [Paper Size].

4Specify the paper size, and then press [OK].

5Press [Paper Type].

6Select a paper weight from 1 to 4, and then press [OK] twice.

Operation panel screen illustration

7Place the originals, and then press the [Start] key.

Note

  • You can also load thick paper into the paper trays and make copies on it. Be sure to specify the paper type under [Tray Paper Settings] in User Tools. For details, see "System Settings", Connecting the Machine/ System Settings.