Skip header
 

Specifying the File Type

This section explains the procedure for specifying the file type of a file you want to send.

File types can be specified when sending files by e-mail or Scan to Folder, sending stored files by e-mail or Scan to Folder, and saving files on a removable memory device.

You can select one of the following file types:

1Press [Send File Type / Name].

Operation panel screen illustration

2Select a file type.

Operation panel screen illustration

3Press [OK].

Note

  • If you select [Store to HDD] under [Store File], you cannot specify the file type.

  • If you select [Store to HDD + Send] under [Store File], files are sent in the specified file type by e-mail or Scan to Folder. However, files cannot be stored in the specified format-instead, they are automatically stored in one of the following file types, depending on the compression and Original Type settings:

    • JPEG

      Under [Scanner Features], [Compression (Grey Scale / Full Colour)] is set to [On], and originals are scanned in full color or gray scale.

    • TIFF

      All other scanning methods

  • The version of the created PDF files is 1.4.

  • High Compression PDF files retain the character legibility of uncompressed PDF files but have much lower data volume. PDF/A is suitable for storing data for a long period of time. For the limitations that apply to each file type, see Notes About and Limitations of File Types.