Skip header
 

This menu appears only when an optional PostScript 3 unit is installed.

Job Timeout

You can specify how long the printer waits (in seconds) before canceling the current job when the job is interrupted while being processed.

Default: [Use Driver / Command]

If you select [Use Machine Settings], enter a value between 0 and 999.

Default: "0"

When set to "0", the current job will not be canceled when interrupted.

Wait Timeout

You can specify how long the printer waits (in seconds) before it cancels receiving the job when the printer cannot detect the end of the job.

Default: [Use Driver / Command]

If you select [Use Machine Settings], enter a value between 0 and 999.

Default: "300"

When set to "0", the print job will not be canceled when the end of the job cannot be detected.

Swtchng. btwn. 1&2 Sided Prt. Func.

Select which side of paper to print on when the PS command is used to perform duplex printing, and the "setpagedevice" command is entered.

  • Active

    Cancels duplex printing, and prints pages after the "setpagedevice" command has been entered on the front side of paper.

  • Inactive

    Retains duplex printing, and prints pages after the "setpagedevice" command has been entered on the back side of paper.

Default: [Active]

Data Format

You can select a data format.

Default: [TBCP]

This setting is not effective when operating the machine with a parallel connection.

When operating the machine with a parallel connection, and also if the binary data is sent from the printer driver, the print job is canceled.

Resolution

You can set the print resolution in dots per inch.

Default: [600 dpi]

Orientation Auto Detect

Specify whether or not to automatically detect the print data orientation.

Default: [On]

Note

  • For details about how to change the Printer Features, see "Accessing User Tools", Connecting the Machine/ System Settings.