Skip header
 

Setting thick paper, thin paper, or OHP transparencies using the control panel

Important

  • Use A4Landscape or 81/2 × 11Landscape size OHP transparencies, and specify this size.

  • When you load OHP transparencies, check the front and back of the sheets, and place them correctly.

  • When printing onto OHP transparencies, remove printed sheets one by one.

1Press the [User Tools/Counter] key.

User Tools/Counter key illustration

2Press [Tray Paper Settings].

3Press [Down arrow keyNext].

4Press [Paper Type: Bypass Tray].

5Select the proper items, according to the paper type you want to set.

  • Press [OHP (Transparency)] on the [Paper Type] area when loading OHP transparencies.

  • To load thin or thick paper, press [Do not Display] on the [Paper Type] area, and then select the appropriate paper thickness in the [Paper Thickness] area.

6Press [OK].

7Press the [User Tools/Counter] key.

Note

  • We recommend that you use specified OHP transparencies.

  • For details about paper thickness, see "System Settings", Connecting the Machine/ System Settings.

PreviousNext