Previous
Press the [User Tools/Counter] key.
Press [Address Book Mangmnt].
Check that [Program / Change] is selected.
Select the name whose folder you want to register.
Press the name key, or enter the registered number using the number keys.
Press [Auth. Info], and then press [
Next].
Press [Specify Other Auth. Info] on the right side of "Folder Authentication".
When [Do not Specify] is selected, the SMB User Name and SMB Password that you have specified in "Default User Name / Password (Send)" of File Transfer settings are applied.
Press [Change] under "Login User Name".
Enter the login user name of the destination computer, and then press [OK].
Press [Change] under "Login Password".
Enter the password of the destination computer, and then press [OK].
Enter the password again to confirm, and then press [OK].
Press [Folder].
Check that [SMB] is selected.
Press [Change] or [Browse Network], and then specify the folder.
To specify a folder, you can either enter the path manually or locate the folder by browsing the network.
For details about how to specify the path manually, see Locating the SMB folder manually
.
For details about how to specify the path using Browse Network, see Locating the SMB folder using Browse Network.
Press [Connection Test] to check the path is set correctly.
Press [Exit].
If the connection test fails, check the settings, and then try again.
Press [OK].
Press [Exit].
Press the [User Tools/Counter] key.
To register the name, see Registering User Information
.You can enter up to 128 characters for the user name and password.
You can enter a path using up to 256 characters.
If User Authentication is specified, contact your administrator.
For details on how to access System Settings, see Accessing User Tools
.
