Current Machine Status

Add staples (Booklet: Back)

The staple of booklet finisher (back) is exhausted.

Add staples (Booklet: Both)

The staple of booklet finisher is exhausted.

Add staples (Booklet: Front)

The staple of booklet finisher (front) is exhausted.

Call Service Center

There is a malfunction in the machine.

Canceling Job...

The job is being reset.

Card/Counter not inserted

The machine is waiting for prepaid card or key.

Coin or amount not inserted

The machine is waiting for coin to be inserted.

Coin/Key Counter not inserted

The machine is waiting for coin or key counter.

Configuring...

Setting is being changed.

Cover Open: Bridge Unit Left

The cover of the bridge unit left is open.

Cover Open: Bridge Unit Right

The cover of the bridge unit right is open.

Cover Open: Duplex Unit

The cover of the duplex unit is open.

Cover Open: Finisher Front

The front cover of Finisher is open.

Cover Open: Finisher Upper

The upper cover of Finisher is open.

Cover Open: Front Cover

The front cover is open.

Cover Open: LCT

The cover of the large capacity tray is open.

Cover Open: Lower Right Cover

The lower right cover is open.

Cover Open: Upper Right Cover

The upper right cover is open.

Current Job Suspended

The current job is suspended.

Empty: Black Toner

The black toner cartridge is almost empty.

Energy Saver Mode

The machine is in Energy Saver Mode.

Error: Ethernet Board

An Ethernet board error has occurred.

Error: HDD Board

A hard disk drive board error has occurred.

Error: Optional Font

An error has occurred in the font file of the machine.

Error: Parallel I/F Board

An error has occurred in the parallel interface.

Error: PDL

An error has occurred in the page description language.

Error: Rem. Certificate Renewal

An error has occurred in the remote server renewal.

Error: USB Interface

An error has occurred in the USB interface.

Error: Wireless Board

An error has occurred although you can access to the board to which Bluetooth interface unit is connected.

Error: Wireless Card

There is a problem with IEEE802.11a/g interface unit or Bluetooth interface unit, or they are not supported.

Full: Finisher Booklet Tray

Booklet tray of Finisher is full.

Full: Finisher Shift Tray

Shift tray of Finisher is full.

Full: Finisher Upper Tray

Finisher's upper tray is full.

Full: Hole Punch Receptacle

Punch Chip receptacle for hole punch is full.

Full: Internal Tray 1

The internal tray 1 is full.

Full: Waste Toner

The waste toner is full.

Hex Dump Mode

It is a hex dump mode.

In Use: Finisher

Other functions is using Finisher.

In Use: Input Tray

Other functions is using the input tray.

In Use: Staple Unit

Other functions is using the staple unit.

Jobs Suspended

All jobs are suspended.

Key Card not inserted

The machine is waiting for key card to be inserted.

Key Card/Counter not inserted

The machine is waiting for key card or key counter to be inserted.

Key Counter not inserted

The machine is waiting for key counter to be left in it.

Low: Toner

The toner cartridge is not set correctly, or toner is almost running out.

Malfunction: Duplex Unit

There is a problem with the duplex unit.

Malfunction: Ext. Charge Unit

There is a problem with the external charge unit.

Malfunction: Finisher

There is a problem with the finisher.

Malfunction: LCT

There is a problem with the large capacity tray.

Malfunction: Output Tray

There is a problem with the output tray.

Malfunction: Staple Unit

There is a problem with the staple unit.

Malfunction: Tray 1

There is a problem with tray 1.

Malfunction: Tray 2

There is a problem with tray 2.

Malfunction: Tray 3

There is a problem with tray 3.

Malfunction: Tray 4

There is a problem with tray 4.

Mismatch: Paper Size

Indicated paper tray does not contain paper of selected size.

Mismatch: Paper Size and Type

Indicated paper tray does not contain paper of selected size and type.

Mismatch: Paper Type

Indicated paper tray does not contain paper of selected type.

Nearly Full: Waste Toner

Waste toner bottle is nearly full.

Need more Staples

Stapler has almost run out of staples.

No Paper: Selected Tray

There is no paper in specified tray.

Not Detected: Duplex Unit

The duplex feed unit is not correctly set.

Not Detected: Fusing Unit

The fusing unit is not correctly set.

Not Detected: Input Tray

The paper feed tray is not correctly set.

Not Detected: LCT

Large capacity tray is not correctly set.

Offline

Machine is offline.

Paper in Duplex Unit

The paper remains in the duplex unit.

Paper in Finisher

The paper remains in Finisher.

Paper Misfeed: Duplex Unit

The paper has jammed in Duplex Unit.

Paper Misfeed: Finisher

The paper has jammed in Finisher.

Paper Misfeed: Input Tray

The paper has jammed in the input tray.

Paper Misfeed: Internal Path

The paper has jammed inside the machine.

Paper Misfeed: Output Tray

The paper has jammed in output tray.

Prepaid Card not inserted

The prepaid card is not inserted, or has insufficient credit.

Printing...

Printing is in progress.

Proxy User/Password Incorrect

The proxy user name and/or password setting is incorrect.

RC Gate Connection Error

RC Gate communication error has occurred.

Ready

The machine is ready to print.

Renewing Remote Certificate

The remote certificate is being renewed.

Replace Cleaning Web

It is time to replace the Cleaning Web.

Replace Fusing Unit

It is time to replace the fusing unit.

SD Card Authentication failed

SD card authentication failed.

Supplies Order Call failed

The supply order call has failed.

Tray Error: Chaptering

The paper feed tray specification error has occurred because chaptering as well as the normal paper use the same tray for printing.

Tray Error: Duplex Printing

Selected paper tray cannot be used for duplex printing.

Warming Up...

The machine is warming up.