Skip header
 

Scan Size

Normally, originals are scanned according to their size, which the machine detects automatically. However, you can specify the scan area manually also. Specifying the scan area manually can be useful for cropping excess border space around an image.

Scan size settings are as follows:

Auto Detect

The machine detects the size of the first page and scans all pages using that size.

If the machine cannot detect the original size, a confirmation message appears. Place the original again.

Regular

The placed original is scanned according to specified standard size regardless of actual size.

The sizes that can be specified are A4PortraitLandscape, B4 JISLandscape, A3Landscape, 81/2 × 11PortraitLandscape, 81/2 × 14Landscape, and 11 × 17Landscape.

Area

Only the area in the specified size is scanned regardless of the actual size of a placed original.

Two sizes can be registered in advance. You must first register the sizes of the originals that you want to scan in "Program / Change / Delete Scan Size" on the Facsimile Features menu. See Program / Change / Delete Scan Size.

Mixed Original Sizes

Select this to individually scan the size of originals loaded into the ADF. For example, when A3Landscape (11 × 17Landscape) and A4Portrait (81/2 × 11Portrait) size originals are sent together, usually all are sent using the size of the first original. By selecting Mixed Original Sizes, the machine scans and sends each original according to its size.

When placing originals in the ADF, align their rear and left edges against the ADF, and adjust the document guide according to the largest original.

Illustration of Mixed Original Sizes

For details about the optional units required for this function, see "Functions Requiring Optional Configurations", Getting Started.

1Press [Scan Settings].

Operation panel screen illustration

2Press [Scan Size].

3Select a scan size.

Operation panel screen illustration

4Press [OK].

Note

  • For details about an original the machine cannot detect its size correctly, see "Sizes Detectable with Auto Paper Select", Paper Specifications and Adding Paper.

  • Since small originals may not be correctly aligned with the original guide, the scanned image may be slanted.

  • When using Mixed Original Sizes, the machine sends the originals by Memory Transmission.

  • When using Mixed Original Sizes, rotation transmission is disabled.

PreviousNext