Skip header
 

Transmitting while Checking Connection to Destination (Immediate Transmission)

Using Immediate Transmission, you can send documents while checking the connection to the destination.

You can specify fax or IP-Fax destinations.

If you specify Internet Fax, e-mail, folder destinations, and group or multiple destinations, the transmission mode is automatically switched to Memory Transmission.

Important

  • It is recommended that you call the receivers and confirm with them when sending important documents.

1Press the [Home] key on the top left of the control panel, and press the [Facsimile] icon on the [Home] screen.

Home key illustration

2Make sure "Ready" appears on the screen.

3Press [Immed. TX].

Operation panel screen illustration

4Place the original into the ADF.

5Select the scan settings you require.

For details about the scan settings, see Scan Settings.

6Specify a destination.

If you make a mistake, press the [Clear] key, and then enter again.

For details about specifying a destination, see Specifying a Destination.

7Press the [Start] key.