Skip header
 

Copying onto envelopes from the bypass tray

Before using this function, select [Envelope] for the paper type under [Tray Paper Settings] in User Tools. For details, see "System Settings", Connecting the Machine/ System Settings.

1Place the original face down on the exposure glass. The original should be aligned to the rear left corner.

Exposure glass illustration

  1. Positioning mark

2Load the envelopes face down in the bypass tray.

[Bypass] is automatically selected.

3Press the [Sharp] key.

4Press [Paper Size].

5Specify the envelope size, and then press [OK] twice.

6Press the [Start] key.

Note

PreviousNext