Skip header
 

Auto Paper Select

The machine selects a suitable size of copy paper automatically based on the detected original size and the reproduction ratio you select.

Original sizes and orientations that can be used with Auto Paper Select are as follows (when copied at a ratio of 100%):

Region A icon(mainly Europe and Asia)

Original location

Original size and orientation

Exposure glass

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5Portrait, 81/2 × 13Landscape

ADF

A3Landscape, B4 JISLandscape, A4PortraitLandscape, B5 JISPortraitLandscape, A5PortraitLandscape, B6 JISPortraitLandscape, 11 × 17Landscape, 81/2 × 11PortraitLandscape, 81/2 × 13Landscape

Region B icon(mainly North America)

Original location

Original size and orientation

Exposure glass

11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11PortraitLandscape, 51/2 × 81/2Portrait

ADF

11 × 17Landscape, 81/2 × 14Landscape, 81/2 × 11PortraitLandscape, 51/2 × 81/2PortraitLandscape, 10 × 14Landscape, 71/4 × 101/2Landscape, A3Landscape, A4PortraitLandscape

1Make sure that [Auto Paper Select] is selected.

Operation panel screen illustration

Note

  • Only the paper trays set to [Do not Display] or [Recycled Paper] in [Paper Type] and also set to [Yes] in [Apply Auto Paper Select] under [Tray Paper Settings] can be selected in Auto Paper Select mode. Trays with a key mark (Operation panel screen illustration) will not be automatically selected. For details, see "System Settings", Connecting the Machine/ System Settings.

Related topics

Rotate Copy
PreviousNext