Skip header
 

Registering Functions in a Program

PreviousNext

Depending on the functions, the number of programs that can be registered is different.

The following settings can be registered to programs:

Copier:

Original type, density, Special Original, paper tray, Store File (except for User Name and Password), Create Margin, Finishing, Cover/Slip Sheet, Edit / Stamp, Dup./Combine/Series, Reduce / Enlarge, number of copies

Document Server (on the initial document print screen):

2 Sided Copy Top to Top, 2 Sided Copy Top to Bottom, Booklet, Magazine, Finishing, Cover/Slip Sheet (except for Main Sheet Tray in Designate / Chapter), Edit / Stamp, number of prints

Facsimile:

Scan Settings, density, Original Feed Type, File Type, Store File (except for User Name and Password), Preview, transmission type, destinations (except for folder destinations), Select Line, Adv.Features, memory transmission/immediate transmission, TX Status Report, TX Mode (except for Subject)

Scanner:

Scan Settings, density, Original Feed Type, Send File Type / Name (except for Security Settings), Select Stored File, Store File (except for User Name and Password), Preview, Text, Subject, Security, Recept. Notice

This section explains how to register functions in a program using copier function as an example.

1Press the [Home] key on the top left of the control panel, and press the [Copier] icon on the [Home] screen.

Home key illustration

2Edit the copy settings so all functions you want to store in a program are selected.

3Press the [Program] key.

Program key illustration

4Press [Program].

5Press the program number you want to register.

Operation panel screen illustration

6Enter the program name.

7Press [OK].

8Press [Exit].

Note

  • The number of characters you can enter for a program name varies depending on the functions as follows:

    • Copier: 34 characters

    • Document Server: 34 characters

    • Facsimile: 20 characters

    • Scanner: 34 characters

  • When a specified program is registered as the default, its values become the default settings, which are displayed without pressing the [Program] key, when modes are cleared or reset, and after the machine is turned on. See Changing the Default Functions of the Initial Screen.

  • When the paper tray you specified in a program is empty and if there is more than one paper tray with the same size paper in it, the paper tray prioritized under [Paper Tray Priority: Copier], [Paper Tray Priority: Facsimile], or [Paper Tray Priority: Printer] in the [Tray Paper Settings] tab will be selected first. For details, see "System Settings", Connecting the Machine/ System Settings.

  • Programs are not deleted by turning the power off or by pressing the [Reset] key unless the program is deleted or overwritten.

  • Program numbers with next to them already have settings made for them.

  • Programs can be registered to the [Home] screen, and can be recalled easily. For details, see Registering a Shortcut to a Program to the [Home] Screen and Adding Icons to the [Home] Screen. Shortcuts to programs stored in Document Server mode cannot be registered to the [Home] screen.

Related topics

Example of Programs
PreviousNext