Skip header
Help
 

Turning on the Power

Important

  • Make sure the power cord is plugged securely into the wall outlet.

  • Turn the power switch off when plugging and unplugging the power plug.

  • Do not turn off the power switch until initializing is completed. Doing so results in malfunction.

1Make sure the power switch is set to "Power Off Off".

Printer illustration

2Plug in the power cable, and securely insert the plug of the power cord into the wall socket.

Printer illustration

3Turn the power switch to "Power On On".

The power indicator on the control panel lights up.

Printer illustration

Note

  • Wait until "Ready" appears on the display panel.

  • The printer may make a noise while initializing. This noise does not indicate a malfunction.