Skip header
 

Top Page > Appendix > Transmission Using IPsec > Enabling and Disabling IPsec Using the Control Panel

Enabling and Disabling IPsec Using the Control Panel

1Press the [User Tools] key.

2Press the [Up arrow key][Down arrow key] key to select [Admin. Tools], and then press the [OK] key.

3If you are requested to enter a password, enter the password using the number keys, and then press the [OK] key.

4Press the [Up arrow key][Down arrow key] keys to select [IPsec], and then press the [OK] key.

5Press the [Up arrow key][Down arrow key] keys to select [Active] or [Inactive], and then press the [OK] key.

6Press the [Clear/Stop] key to return to the initial screen.

Note

  • A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].

  • You can press the [Escape] key to exit to the previous level of the menu tree.

Reference