Skip header
 

Top Page > Configuring the Machine Using the Control Panel > Basic Operation Using the Menu Screen

Basic Operation Using the Menu Screen

This section describes the basic procedure for specifying and changing the machine's settings.

If you want to configure the machine's system settings, press the [User Tools] key. If you want to configure the settings of machine's current operation mode, press the [Left arrow key][Right arrow key] keys.

The procedure for changing the copy quality setting is provided as an example.

1Press the [Copy] key.

Copy key illustration

2Press the [Left arrow key][Right arrow key] keys.

Left and right arrow keys illustration

3Press the [Up arrow key][Down arrow key] keys to select [Original Type], and then press the [OK] key.

4Press the [Up arrow key][Down arrow key] keys to select the document type of the original, and then press the [OK] key.

5Press the [User Tools] key to return to the initial screen.

Note

  • You can press the [Escape] key to exit to the previous level of the menu tree.