This section describes how to set 2-in-1/4-in-1 copy mode for the current job.
This function is only available when the original is set in the ADF, not when it is set on the exposure glass.
To use this function, the paper size used for printing copies must be set to A4, Letter, or Legal.
2-in-1 mode
You can copy two pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:
Portrait
Landscape
Scaling is preset according to the paper size: 70% for A4 size, 64% for Letter size, and 60% for Legal size.
4-in-1 mode
You can copy four pages of an original onto a single sheet of photocopied paper. Depending on the orientation of the original, the printout format can be selected from the following:
Portrait: L to R (Left to Right)
Portrait: T to B (Top to Bottom)
Landscape: L to R (Left to Right)
Landscape: T to B (Top to Bottom)
Scaling is preset to 50%, regardless of the printout paper size.
Use this procedure to set 2-in-1/4-in-1 copy mode for the current job.
Press the [Reduce/Enlarge] key.
Press [Reduce], press the [
][
][
][
] keys to select [Comb. 2 on 1] or [Comb. 4 on 1], and then press the [OK] key.
Press the [
][
] keys to select the desired printout format, and then press the [OK] key.
If [Comb. 2 on 1] has been selected, select [Portrait] or [Landscape].
If [Comb. 4 on 1] has been selected, select [Portrait: L to R], [Portrait: T to B], [Landscape: L to R], or [Landscape: T to B].
You can press the [Escape] key to exit to the previous level of the menu tree.
You can change the machine's default [Reduce/Enlarge] setting to always make photocopies in 2-in-1 or 4-in-1 mode.
Temporary job settings are cleared in the following cases:
When no input is received for the period of time specified in [System Auto Reset Timer] while the initial screen is displayed.
When the [Clear/Stop] key is pressed while the initial screen is displayed.
When the machine's mode is changed.
When the power is turned off.
When the machine's default for the same setting is changed.
For details about [Reduce/Enlarge], see Copy Settings.
For details about [System Auto Reset Timer], see Administrator Settings.