Skip header
 

Top Page > Using the Copier Function > The Screen in Copier Mode

The Screen in Copier Mode

This section provides information about the screen when the machine is in copier mode.

By default, the display shows the copier screen when the machine is turned on.

If the scanner or fax screen is shown on the display, press the [Copy] key on the control panel to switch to the copier screen.

Copy key illustration

Screen in standby mode

Operation panel screen illustration numbered callout illustration

  1. Current status or messages

    Displays the current status or messages.

  2. Current settings

    Displays the current tray, reproduction ratio, and scan settings.

  3. Selection key items

    If function names appear on the bottom, you can use them by pressing the corresponding selection keys.

  4. Copy quantity

    Displays the current copy quantity. You can change the copy quantity using the number keys.

Note

  • The start-up mode can be specified in the [Function Priority] setting under [Admin. Tools].

Reference