Specifying Paper Type and Paper Size
This section describes how to specify the paper size and paper type using the control panel.
Paper type and size can also be specified using the printer driver. For details, see the printer driver Help.
For prints from the bypass tray, you can select to print according to either the printer driver settings or the control panel settings with [Bypass Tray Priority] under system settings.
If [Auto Continue] under system settings is enabled, printing stops temporarily if a paper type/size error is detected. The printing restarts automatically with the settings made with the control panel after about ten seconds.
For details about [Bypass Tray Priority], see System Settings
.For details about [Auto Continue], see System Settings
.
