Installing the PostScript 3 Printer Driver (Windows Vista/7, Windows Server 2008)

This section explains how to install the PostScript 3 printer driver under Windows Vista/7 or Windows Server 2008 when using the printer as a Windows network printer.

Manage Printers permission is required to install the driver. Log on as an Administrators group member.
If you print from a print server connected to the machine using the SmartDeviceMonitor for Client port, the client cannot use Recovery Printing and Parallel Printing.
If you print under Windows Vista/7 or Windows Server 2008 print server, notification functions of SmartDeviceMonitor may not be used with the client computer.
You can install the printer driver from the CD-ROM provided with this machine or download it from the manufacturer's Web site.

Quit all applications currently running.
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Select an interface language, and then click [OK].
The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Suomi, Magyar, Cestina, Polski, Portugues, Russian, Catala, Turkce.
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
Click [Add a network, wireless or Bluetooth printer].
Click [The printer that I want isn't listed].
Select [Browse for a printer], and then click [Next].
Select your machine, and then click [Select].
If a security warning message appears, click [Install driver].
The printer driver installation starts.
Check the machine name, and then click [Next].
If a check box for setting the machine as a default printer appears, configure as necessary.
Specify whether or not to print a test page, and then click [Finish].
If a check box for setting the machine as a default printer appears, configure as necessary.
The printer driver installation starts.

To stop installation of the selected driver, click [Cancel] before installation is complete.
Depending on your computer's operating system, the [AutoPlay] dialog box may appear. If this happens, click [Run SETUP.EXE]. If the [User Account Control] dialog box appears, click [Yes] or [Continue] to allow the auto play program to run.
A user code can be set after the printer driver installation. For information about user code, see the printer driver Help.
Auto Run may not work with certain operating system settings. In that case, launch "Setup.exe" on the CD-ROM root directory.